Ubiquiti AirMAX Products

Overview Ubiquiti Networks launches the Power Beam® ac ISO, an air MAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. Improved Noise Immunity The Power Beam ac ISO directs RF energy in a tighter beam width, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the Power Beam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Integrated Radio Design Ubiquiti’s Inner Feed® technology integrates the radio into the feed horn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Software Sporting an all-new design for improved usability, airOS® v7 is the revolutionary operating system for Ubiquiti® airMAX ac products.

Powerful Wireless Features:

• AirMAX ac Protocol Support
• Long-Range Point-to-Point (PtP) Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control: Automatic/Manual
• Automatic Distance Selection (ACK Timing)
• Strongest WPA2 Security Usability Enhancements
• Dynamic Configuration Changes
• Instant Input Validation
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Comprehensive Array of Diagnostic Tools, including Ethernet Cabling Test, RF Diagnostics, and airView® Spectrum Analyzer

• Item Code: PBE-5AC-500
• Delivery Time: READY
• Packaging Details: PACK OF 2

High-Performance airMAX® BridgeIncorporating a dish reflector design with advanced technology, the Power Beam™ is the latest generation of Ubiquiti Networks® airMAX® CPE for customer locations. The form factor of the Power Beam™ features the highest gain for its size. The Power Beam’s excellent beam directivity provides the best performance in high-noise environments.

• Item Code: PBE-M5-400

Overview:

• Ubiquiti etworks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the PowerBeam® 5AC Gen 2, with dedicated Wi-Fi management.

Improved Noise Immunity:

• The PowerBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design:

• Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative design, the PowerBeam 5AC Gen 2 is versatile and cost-effective to deploy.

Software airOS8:

• AirOS® 8 is the revolutionary operating system for Ubiquiti® airMAX ac products.

Powerful Wireless Features:

• Access Point PtMP airMAX Mixed Mode
• AirMAX ac Protocol Support
• Long-Range Point-to-Point (PtP) Link Mode
• Selectable Channel Width
• PtP Mode: 10/20/30/40/50/60/80 MHz
• PtMP Mode : 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control: Automatic/Manual
• Automatic Distance Selection (ACK Timing)
• Strongest WPA2 Security
• Enclosure Characteristics: Antenna Feed-Outdoor UV Stabilized Plastic, Dish Reflector: Powder-Coated SPCC

Umobile App:

• The PowerBeam 5AC Gen 2 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.

AccessingairOS via Wi-Fi:

• The U®Mobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android). UMobile allows you to set up, configure, and manage the PowerBeam 5AC Gen 2 and offers various configuration options once you're connected or logged in.

• Item Code: PBE-5AC-Gen2

Overview:

• Now with airOS®7 and airView®
• AirOS®7 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
• Breakthrough Industrial Design
• Featuring the freedom of three-axis alignment, the LiteBeam ac fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.
• Compact in Size, Light in Weight
• A lightweight form factor contained within ultra-compact packaging, the LiteBeam ac is ideal for shipping and logistics.

• Item Code: LBE-5AC-23

Overview Ubiquiti Networks launches the Power Beam® ac ISO, an air MAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. Improved Noise Immunity The Power Beam ac ISO directs RF energy in a tighter beam width, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the Power Beam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Integrated Radio Design Ubiquiti’s Inner Feed® technology integrates the radio into the feed horn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Software Sporting an all-new design for improved usability, airOS® v7 is the revolutionary operating system for Ubiquiti® airMAX ac products.

Powerful Wireless Features:

• AirMAX ac Protocol Support
• Long-Range Point-to-Point (PtP) Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control: Automatic/Manual
• Automatic Distance Selection (ACK Timing)
• Strongest WPA2 Security Usability Enhancements
• Dynamic Configuration Changes
• Instant Input Validation
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Comprehensive Array of Diagnostic Tools, including Ethernet Cabling Test, RF Diagnostics, and air View® Spectrum Analyzer

• Item Code: PBE-5AC-620

The Ubiquiti Rocket Dish Antenna has been designed to seamlessly work together with the Ubiquiti Rocket M5 or Mikro Tik UB Tik™ for an instant long range powerful PtP Link. Installing the Rocket M5 or the Mikro Tik UBTik™ onto the Rocket Dish Antenna requires no special tools, you simply snap it into place with the mounts provided.

Specifications:

• Air MAX® 2x2 PtP Bridge Dish Antenna
• GHZ 5
• 30 DBi
• New Technology OMT Design
• Carrier Class Performance.
• Breakthrough Price Points.

Includes:

• Antenna Dish
• RPSMA to RPSMA weatherproof jumper cable to connect to Rocket
• Pole/Tower mounting hardware

• Item Code: RD-5G30

Overview:

• Ubiquiti Networks has designed airMAX ac radios with high performance and ease of installation in mind. The Rocket®Prism 5AC Gen 2 features both airMAX ac and airPrism technologies for maximum wireless performance in high density areas.

Pair the Rocket Prism 5AC Gen 2 with airMAX ac antennas for optimal performance:

• PtP Backhaul links RocketDish ac antenna
• PtMP links airMAX ac Sector

Worldwide 5 GHz Coverage:

• Deploy the Rocket Prism 5AC Gen 2 anywhere in the world. It delivers complete coverage of the 5 GHz spectrum with a single radio. The Rocket Prism 5AC Gen 2 allows for flexibility in configuring channel bandwidths (subject to local country regulations).

Software air OS8:

• AirOS® 8 is the revolutionary operating system for Ubiquiti® airMAX ac products.

Powerful Wireless Features:

• Access Point PtMP airMAX Mixed Mode
• airMAX ac Protocol Support
• Long Range Point to Point (PtP) Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control: Automatic/Manual
• Automatic Distance Selection (ACK Timing)
• Strongest WPA2 Security
• The Rocket Prism 5AC Gen 2 is designed to deliver maximum spectral efficiency and up to 500+ Mbps Real TCP/IP throughput.

Features:

• 5 GHz Frequency Band With plenty of available spectrum, this unlicensed band works well for long distance links. The Rocket Prism 5AC Gen 2 features full band 5 GHz coverage and maximizes output power for the US market, meeting strict OOBE requirements.
• AirView Use the real???time spectrum analyzer so you can identify noise signatures and design your wireless links to minimize noise interference.
• High Performance To take full advantage of its design and capabilities, deploy the Rocket Prism 5AC Gen 2 for PtP or PtMP links in high RF noise environments.
• AirPrism Sector Antenna You can mount three Rocket Prism 5AC Gen 2 radios on the airPrism 5 GHz 3x30° HD Sector Antenna, model AP, 5AC, HD, for PtMP links. Each Rocket radio corresponds with a specific 30° beamwidth and independently transmits and receives.
• Dedicated Management Radio Access the airOS configuration interface instantly through the UMobile app to set up and manage your Rocket 5AC Prism Gen 2.
• Robust Die Cast Aluminum Casing Helps protect the Rocket Prism 5AC Gen 2 against electromagnetic interference.
• GPS for Superior Co-Location Performance Precise GPS frame synchronization enable co located Rocket Prism 5AC Gen 2 radios to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability.
• Gigabit Ethernet Delivers high throughput over its wired connection.

Other:

• Remote Reset Support, Software Enabled/Disabled,
• VLAN Support, 256QAM, GPS*, TX Filter

Ubiquiti Specific Features:

• 30/50/60 MHz Channels, airMAX ac Mode, Traffic Shaping with Burst Support, Discovery Protocol, Frequency Band Offset, Ackless Mode

• Item Code: RP-5AC-Gen2

Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks

Nano Station M5 Features:

• Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running AirMax sector antenna's and Rocket M5's. 
• Next-Gen Antenna Design: 11dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor.
• Dual Ethernet Connectivity: A secondary ethernet port with software enabled POE output for seamless IP Video integration.
• Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. 
• 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold seperately (SKU#I8023AF-OD or I8023AF-ID) 
• Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the Nanostation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The Nano Bracket is sold seperately (SKU#MT-NANO U)

Product Includes:

• One (1) Nanostation 5.8GHz
• One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug. 
• Mount and mounting strap (NanoBracket sold seperately)

• Item Code: NSM5

The Ubiquiti airMAX Rocket M5 AC is the latest in the Rocket range with added 802.11ac for higher throughputs than other Rocket M5 models. The New Rocket AC can attach to any of the current rocket dish's but to get the most from your PtP link the Rocket AC should be paired with the Rocket Dish AC. The Rocket AC comes as standard with 10/100/1000 Ethernet interfaces allowing the higher wireless link throughput of up to 450Mbps to be passed at both ends. This is 802.11ac ONLY and will only work with other AC devices, Featuring proprietary airMAX ac technology, the Rocket5ac Lite is ideal for deployment in Point-to-Point (PtP) bridging applications requiring maximum performance. Point-to-MultiPoint (PtMP) functionality is added with firmware update 7.1-rc, this new firmware allows the rocket ac to connect to multiple Rocket ac clients. (This only works on 802.11ac and airMAX only), Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Plug and Play Integration The innovative airMAX ac antennas feature significant advances in beam and energy isolation performance for increased capacity of airMAX networks.

Web Administration is very simple and clear. Settings include:

• AP mode, client
• Traffic shaping
• QoS
• Between WAN and LAN routing and transparent bridge, with or without NAT
• Antenna polarization (vertical / horizontal / adaptive)
• Signal strength, which correspond to the specific LED indicator
• Output power up to 27 dBm
• Antenna Alignment Tool
• Site Survey

 

• Item Code: Rocket5AC-Lite

Overview:

• Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.
• Improved Noise Immunity
• The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Software airOS8:

• AirOS® v8 is the revolutionary operating system for Ubiquiti® airMAX ac products.

 

Powerful Wireless Features:

• Access Point PtMP airMAX Mixed Mode
• AirMAX ac Protocol Support
• Long-Range Point-to-Point (PtP) Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control: Automatic/Manual
• Automatic Distance Selection (ACK Timing)
• Strongest WPA2 Security

UMobile App:

• The LiteBeam 5AC Gen 2 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
• Accessing airOS via Wi-Fi
• The UMobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android). UMobile allows you to set up, configure, and manage the LiteBeam 5AC Gen 2. It offers the following options once you're connected or logged in to the device:
• Status Check link status information or the basic configuration settings of the LiteBeam 5AC Gen 2.
• Configuration  Change or update the existing configuration of the LiteBeam 5AC Gen 2.
• Tools Access tools for initial installation and configuration of the LiteBeam 5AC Gen 2.
• Actions Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the LiteBeam 5AC Gen 2.

• Item Code: LBE-5AC-Gen2

• Item Code: AM-5G19-120

Ubiquiti Rocket M5:

• 802.11N 5 GHz 2x2 MIMO AirMax TDMA Base Station

 

Ultimate in RF Performance: 

• The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP Airmax base-station applications.
• Rocket M Seamlessly Integrates with AirMax Base Station and Rocket Antennas: Rocket M and AirMax BaseStation/Rocket Antennass have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the RocketDish or AirMax Antennas.
• The Rocket M easily and securely snaps into place on Ubiquiti Carrier-Class Antennas
• The Rocket Dish 5G-30 Antenna or any of the AirMax 5 GHz antennas.
• AirOS V: Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Features:

• High Performance MIMO 2x2 TDMA Architecture
• Extended Outdoor Range
• Ubiquiti AirOS software
• External status LEDs
• External reset button
• Pole, Wall or Window mount options

• Item Code: M5

Product Description:

• Wireless CPE,Outdoor 2x2 MIMO 8DBI DUAL-POL 802.11g/n
• Performance Breakthrough
• Featuring 2x2 MIMO technology, the new LocoStation M links significantly faster and farther than ever before.
• Next-Gen Antenna Design
• New antenna array designs featuring 8dBi dual-polarity gain at 2.4GHz with optimized cross-polarity isolation in a compact form-factor.
• POE injector / power supply: 110-240VAC 24VDC 0.5A US-style plug
• USA / Canada frequency version.
• POE power supply/injector included.
• Note: Set to the 20MHz width and disable Airmax to allow use with standard 802.11n devices.

• Item Code: locoM2